AC21-NZE-LibUpdate2

Archicad 21 NZE Library Update 5555.10



Release Notes – Archicad 21 NZE Library Update

Version 5555.10

This Update can be applied to any build of Archicad 21 NZE (Build 3009 and above). It contains the fixes and new features of the previous build of the Library Update.

Further list of improvements in this update

  • 236221 DOOR/WINDOW: The Unit Size of Values of the Norwegian Door and Window Marker’s were shown by Project Preferences.
  • 235974 DOOR: The horizontal preview of the door was misleading in the Door Default Settings.
  • 234880 OBJECT: ‘Bookshelf 21’ had incorrect floor plan display.
  • 235386 OBJECT: Skylight Dormer Shed was shown as it had been mirrored.
  • 229845 RAILING: Pig-ear Rail’ connection was not continuous in 3D.
  • 238567 RAILING: Line appeared between the Railing and the Railing End in certain circumstances.
  • 233560 RAILING: Molding Profile on wall panel was twisted in certain circumstances.
  • 236305 RAILING: Panels at the end of the railing were cut incorrectly.
  • 235431 STAIR: Open Stringer hotspots were created far away from the stair.
  • 238645 STAIR: Stair start and end symbols were missing after file opening.
  • 239533 STAIR: The position of the profiled landing frame changed after forward migration.
  • 237387 STAIR: The Stair Dimension Label’s ‘Automatic’ parameter was empty by default on the “Custom Settings/Regulation Setup tabpage.
  • 235835 STAIR: Curved risers had wrong geometry.
  • 226735 STAIR: In case of curved stairs, slanted tread was not cut properly in 3D.
  • 231868 STAIR: Profiled Landing Beam’s Secondary Beams were always Profiled, regardless of their settings.
  • 222731 STAIR: Secondary supports did not follow the geometry of winder stair correctly.
  • 231669 STAIR: Secondary Supports were wrong in case of L-shaped stairs with winder with equal goings.
  • 230443 STAIR: Segments of the Undersupport Beam were missing under the landing.
  • 238623 STAIR: Separator lines were missing from the Stair Beam Structure and the Secondary Support.
  • 236244 STAIR: The Flight Cantilevered Metal Pen was wrong in 3D in certain circumstances.
  • 227678 STAIR: Unnecessary lines appeared at the Flight-Start of Beam Stairs, in case of Vertical Connection.

Install steps

  1. Download the Update.
  2. Exit Archicad before you start the installer.
  3. Make sure that you have administrator rights on your computer.
  4. Make sure that components of your Archicad Library have not been renamed or in any other way modified. If you have modified the Archicad 21 standard library, please re-install it from the original Archicad installer.
  5. Double-click on the downloaded file to start the installer. To run the installer, Java 8u120 must be installed on your computer. You can install Java version from your original Archicad installer.
  6. Follow the instructions of the wizard to complete the installation.

Download

Download Language Windows 64-bit MSI package Mac OSX Last modified
Archicad 21 NZE Library Update 5555.10  

NZE

 506 MB 511 MB 504 MB April 5, 2018